B&G HS2000 - Manual (Page 17)

HS 2000 User Manual
Part 2 - Operating Information
HB-0846-03
2-4
2.1.2 On/Off Illumination Key
This key controls the application of power to the system and the level
of illumination at all displays.
One short press of this key applies power to the HS 2000 System
and the display is activated. A second short press of the key provides
full background illumination on all system displays. Further short
presses of the key decrease the illumination in three stages from full
brightness to OFF. The next press enables full illumination again.
This operation at any FFD within the system, performs the same
sequence on all HS 2000 displays connected to the system. Display
lighting can be adjusted locally at each FFD. (See Paragraph 2.9 -
Lighting Control).
To switch the system OFF, press and hold down the key for three
seconds. After this time the message POWER-OFF appears in the
upper display; release the key and after a further two seconds the
system switches OFF.
2.1.3 Page Key
This key enables the user to select the User Defined Pages
(Displays) presented on the FFD.
By pressing this key the user is able to choose any one of the four
user defined page displays accessing various functions of the HS
2000 System (two functions per page).
Notes
1. To return to the start position at any time press the Page Key.
2. Successive operations of the Page Key will display each of the
user defined pages in rotation.
3. The initial four pages can be reconfigured to meet any specific
needs using the remaining keys and the menu system as
described in Paragraph 2.5.2.
4. To initiate control of 20/20 displays hold down the Page Key for 2
seconds (See Part 5 - Options).
2.1.4 Scroll Keys
Two scroll keys are provided: Scroll Up and Scroll Down. These
keys have three functions:
(a) To select the upper or lower display to change
functions.
(b) To scroll through (select) the menu choices.
(c) To increase or decrease numerical values, such as
calibration values or degrees.