B&G Network GPSplus - Manual (Page 59)

60
UPLOADING WAYPOINTS
Uploading of waypoints is accomplished via the secondary
NMEA device socket and cable directly from the position
fixer selected. All waypoints are transferred until the ENTER
key is pressed to terminate uploading.
1. Press
the WPT/MOB key.
2. Press the SETUP key eight times. The display will
show:
3. Press
the ENTER key. The display will show:
The number will increase indicating the total number of
waypoints transferred so far.
4. Press
the ENTER key to terminate uploading.
NOTE: Uploading will stop automatically if a waypoint
having the same name as one already in the GPSPlus
library is uploaded.
DOWNLOADING ROUTE DATA
When multiple GPSPlus displays are used it may be
necessary to copy the route data (that is, all the waypoint
data stored in a route), between displays. This procedure is
similar to copying the waypoint library as previously
explained and is also called downloading.
1. Press
the ROUTE key until ROUTE # is displayed.
2. Press
the SETUP key three times. The display will show
DOWNLOAD.
3. Press
the ENTER key to download the route data.
NOTE: It is possible for the GPSPlus to display an error
message DATA FAULT when downloading routes. This
indicates two routes with the same route number exist. If
this occurs erase one of the routes, or redefine another
route using the same waypoint data.
SEtUP
UPLOAD WPTS
SEtUP
UPLOADING 1
ROUtE 1
USEd
DOWNLOAD