B&G Network GPSplus - Manual (Page 6)

6
USING THE LIGHTS KEY
The GPSPlus display unit has 3 levels of illumination and
off, controlled by the LIGHTS key. It also changes the
illumination level of the key legends. The LIGHTS key is
always illuminated so even in complete darkness the key
can be located.
•
LIGHTS 0 OFF
•
LIGHTS 3 High
•
LIGHTS 2 Medium
•
LIGHTS 1 Low
NOTES ABOUT ENTERING DATA
• When a number or name is flashing the ▼ STEP ▲ knob
can be turned to alter the flashing display, without the
need to press any other keys. To select the value that is
currently flashing, press the ENTER key.
• When in a SETUP mode, if a key has not been pressed
for a period of 30 seconds the SETUP sequence will be
exited automatically.
• The ▼ STEP ▲ knob increases values when turned
clockwise and decreases values when turned anti-
clockwise.
• To end any SETUP sequence and return to normal
operation, press any key except ENTER or the
▼ STEP ▲ knob.