Baseline Systems BL-Commander User Manual
Page 9
Auto Up/Auto Back
These functions allow forward and backward advancement through each station. This will turn on the
next sequential station number.
To operate press:
Multiple Zones
Press
the
"9" key before a two digit zone number to turn on a multiple zone. Example: "903", "Valve
On" will turn zone 3 on. You may have up to six multiple zones on at a time and a single zone plus a
master valve. Multiple zones cannot be changed by the "Auto Up" or the "Auto Back" functions, but
they can have an independent time duration.
A station registered for multiple mode operation will not be turned off automatically when other
stations on the same Receiver are turned on. Also, the single mode station will not be automatically
turned off when multiple mode stations are turned on. If you try to turn on a seventh multiple mode
valve, the first multiple mode valve turned on will be automatically turned off.
WARNING: Make sure your controller has adequate power to operate the number of multiple stations
you intend to have on at one time. Otherwise, you may overload the circuit breaker at your controller.