Bio-Rad T100™ Thermal Cycler - Manual (Page 31)

T100 Thermal Cycler Manual
21
Self-Test Function
The self-test function performs a diagnostic test of the operation of the T100 thermal cycler.
To initiate the self-test:
1. From the home screen, open the Tools menu.
2. Touch Self-Test.
3. Touch Start (Figure 25).
Figure 25. Self-Test function in progress.
Logs
The Logs screen displays the previous history of the T100 thermal cycler for record keeping.
1. Touch Tools > Logs. The instrument displays a list of all the previous runs (Figure 26).
2. Select a run and touch View. The details of the selected run are displayed.
3. To view the system log, touch System Log from the Logs screen. The system log is a
summary containing all errors in previous runs such as power failures and other issues.
4. Touch Export Log to export the selected log to a USB flash drive, or touch Export All to
export all the logs.
Figure 26. List of the run logs stored on the instrument.