Bio-Rad UView™ 6x Loading Dye plus Mini Transilluminator - Manual (Page 6)

UView Mini Transilluminator 5
Using the Transilluminator
Place gel/sample on the filter area. We recommend the gels be
placed on a gel tray to protect the filter surface from cuts and
scratches. We recommend that gloves be worn to prevent skin
contact with gel and staining agents.
Turn on the transilluminator via the power switch on the back of
the unit. The tubes within the unit will begin glowing beneath the
filter.
After viewing the sample, turn the transilluminator off by turning the
power switch to the off position.
Power connector input
Power switch