Cortelco Colleague 2211 User Manual
Page 11
c.
When your party answers, adjust the sound level of his or her voice by sliding
the VOLUME CONTROL located on the right side of the phone.
d.
After the conversation has finished, press SPEAKERPHONE to hang up.
Note:
1.
If you wish to switch from speakerphone to handset, simply lift the handset.
2.
If you wish to switch from handset to speakerphone, press and release
Speakerphone and then hang up the handset.
MEMORY
To Store A Number In Memory:
Note: Must be off-hook to store a number in memory
1.
Press the STORE button, [SAVE TO?] appears on the display
window.
2.
Press the desired memory location.
•
To store in an auto memory button (located on right-hand side of base) - Press
1, 2, 3, or 11).
•
To store in a keypad memory location - Press one of the keypad buttons (l,
2, 3, or 0).
3.
[ENTER NUM >] appears in the display. Dial the telephone number (24 digits
maximum) to store in
memory.
Note: The memory locations can be chained together to store numbers of
longer length.
4.
Press STORE again.
5.
Use pull out memory index to write in name and the memory button where it is
stored.
To Dial A Phone Number In Memory
1.
Lift the handset and wait for a dial tone.
2.
Press any memory location.
•
To dial an auto memory button (located on right-band side of base) - Press
the desired auto memory button (1, 2, 3.... or 11).
•
To dial a keypad memory location - press the MEM DIAL button first, and then
the desired keypad button (1, 2, 3.... or 0).
3.
The number will be displayed and dialed automatically.
8