Cooper Instruments & Systems DFI INFINITY Digital Force Indicator/Controller - Manual (Page 11)

4.2 Rear Of The Meter
The following is a brief description of each part of the rear of the meter. The label on the top of the mounting sleeve
(not the case) identifies the location of the connectors found at the rear of the meter.
Figure 4-2A. AC Power - Connector Label for Rear Connectors
Figure 4-3 shows the rear of the meter with the optional relay output board and a serial communications board
installed.
Figure 4-2B. DC Power - Connector Label for Rear Connectors
CF 67 6 M1291/N/0403 11279ML-02 Rev. A