Yealink SIP-T22 - Manual (Page 112)

User Guide SIP-T22P/SIP-T22 IP Phone
100
4. Press or , or the Switch soft key to select Record from the Key Type field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a URL record key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select URL Record from the Type field.
4. Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the Value field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Record and URL record keys are configurable via web user interface at the path
DSSKey->Line Key.
The record and URL record keys control the recording, and are available:

During an active call

When calls are on hold or mute

During a blind or attended transfer

During a conference call

When the phone prompts you to answer an incoming call
The record and URL record keys are not available when:

There are no connected calls on your phone

You place a new call
To record a call:
1. Press a record or a URL record key during a call.
If the recording starts successfully, the recording icon will appear on the LCD screen
and the record or URL record key LED will flash green.