Yealink SIP-T22 User Manual
Page 95
Basic Call Features
83
4) (Optional.) Enter the no answer forward on code and off code respectively
in the On Code and Off Code field.
You can also enable no answer forward for all accounts. After no answer
forward was enabled for a specific account, do the following:
1) Press or to select the No Answer field.
2) Press the All Lines soft key.
The LCD screen prompts “Copy to All Lines?”.
3) Press the OK soft key to accept the change or the Cancel soft key to cancel.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the idle screen and the associate line icon changes to .
Call forward is configurable via web user interface at the path Features->Forward &
DND.
Note
To disable call forward in phone mode:
Do one of the following:
-
Press when the phone is idle.
-
Press Menu->Features->Call Forward.
Press or to select the desired forwarding type, then press the Enter soft
key.
Press , , or the Switch soft key to
select Disable to disable the call forward.
You can also enter the SIP URL or IP address in the Forward To field. For more information
on using the SIP URL or IP address, refer to
Call forward is local to the phone, and may be overridden by the server settings. Call
forward on code or off code may be different between servers. For more information,
contact your system administrator.