Yealink SIP-T26P - Manual (Page 32)

User Guide for the SIP-T26P IP Phone
20
You can configure the backlight status on the LCD screen as the following types:

Always Off: Backlight is turned off permanently.

Always On: Backlight is on permanently.

15, 30, 60, 120, 300, 600 or 1800: Backlight is turned off when the phone is inactive
after the specified time (in seconds).
To configure the backlight via web user interface:
1. Click on Settings->Preference.
2. Select the desired type from the pull-down list of Backlight Time (seconds).
3. Click Confirm to accept the change.
Note
The default language of the phone user interface is English. The phone will detect and
use the same language as which of your web browser for the web user interface. If the
language of your web browser is not supported by the phone, the web user interface
will use English. You can change the language for the phone user interface and the web
user interface respectively.
Note Not all of the supported languages are available for selection. The available languages
depend on the language packs currently loaded to the IP phone. Please contact your
system administrator for more information on the available languages of your new
phone.
Backlight is configurable via web user interface only.