Yealink SIP-T26P - Manual (Page 61)

Customizing Your Phone
49
To activate the headset mode:
1. Physically connect the headset.
2. Press to activate the headset mode.
Note
You can use two headsets when enabling dual headset. To use this feature, you must
physically connect headsets to the headset jack and handset jack respectively. Once
the phone connects to a call, the headset connected to the headset jack will have
full-duplex capabilities, while the one connected to the handset jack will only be able to
listen.
To enable dual headset via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Dual-Headset.
3. Click Confirm to accept the change.
Note
If headset prior is enabled, the headset mode will not be deactivated until you press the
H EADSET key again.
Headset prior is configurable via web user interface only.
Dual headset is configurable via web user interface only.