Directed call pickup – Yealink SIP-T28P User Manual
Page 114
Advertising
User Guide for the SIP-T28P IP Phone
102
Directed Call Pickup
To enable the directed call pickup via web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Directed Call Pickup.
3. Click Confirm to accept the change.
To configure the directed call pickup code on a global basis via web user interface:
1. Click on Features->Call Pickup.
2. Enter the directed call pickup code in the Directed Call Pickup Code field.
3. Click Confirm to accept the change.
Advertising