Yealink SIP-T28P - Manual (Page 139)

Advanced Phone Features
127
You can leave voice mails for someone else on the SIP-T28P IP phone. You can also listen
to the voice mails stored in a centralized location. When receiving a new voice mail, the
phone will play a warning tone and the MESSAGE key LED will illuminate and the LCD
screen will display a flashing icon.
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.
To configure voice mail access codes via phone user interface:
1. Press Menu->Messages->Voice Mail->Set Voice Mail.
2. Press the navigation keys to select the account which you want to set.
3. Press the 123 soft key to select the proper input mode and then enter the voice mail
access code (e.g., *97).
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Voice mail is not available on all servers. Contact your system administrator for more
information.
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.