Small form factor computer, About your small form factor computer, Front view – Dell OptiPlex 755 User Manual

Page 180

Advertising
background image

Back to Contents Page

 

Small Form Factor Computer

User's Guide

  

About Your Small Form Factor Computer

  

Removing the Computer Cover

  

Inside Your Computer

  

Chassis Intrusion Switch

  

System Board Components

 

About Your Small Form Factor Computer

 

Front View

1

USB 2.0
connectors
(2)

Use the front USB connectors for devices that you connect occasionally,
such as joysticks or cameras, or for bootable USB devices (see

System

Setup

for more information about booting to a USB device).

It is recommended that you use the back USB connectors for devices that
typically remain connected, such as printers and keyboards.

2

power button Press to turn on the computer.

 

NOTICE:

To avoid losing data, do not turn off the computer by pressing

the power button. Instead, perform an operating system shutdown. See

Turning Off Your Computer

for more information.

 

NOTICE:

If your operating system has ACPI enabled, when you press

the power button the computer will perform an operating system
shutdown.

3

Dell badge

Can be rotated to match the orientation of your computer. To rotate,
place fingers around the outside of the badge, press firmly, and turn the
badge. You can also rotate the badge using the slot provided near the
bottom of the badge.

4

LAN indicator
light

Indicates that a LAN (local area network) connection is established.

5

diagnostic
lights

Use the lights to help you troubleshoot a computer problem based on the
diagnostic code. For more information, see

Diagnostic Lights

.

6

hard drive
activity light

This light flickers when the hard drive is being accessed.

7

power light

The power light illuminates and blinks or remains solid to indicate
different operating states:

l

 

No light — The computer is turned off.

l

 

Steady green — The computer is in a normal operating state.

l

 

Blinking green — The computer is in a power-saving mode.

l

 

Blinking or solid amber — See

Power Problems

.

To exit from a power-saving mode, press the power button or use the
keyboard or the mouse if it is configured as a wake device in the
Windows Device Manager. For more information about sleep modes and
exiting from a power-saving mode, see

Power Management for Windows

XP and Windows Vista

.

See

Dell Diagnostics

for a description of light codes that can help you

troubleshoot problems with your computer.

Advertising