Dell OptiPlex 760 User Manual
Page 23
Setting Up Your Computer
23
6 Press the power buttons on the monitor and the computer.
7 Connect to your network.
Connecting the AC Power Adapter (Ultra Small Form Factor Only)
1 Connect the AC power adapter to the power connector on the back of the
computer. Ensure that the latch clicks into place for a secure connection.
2 Connect one end of the AC power cable to the power adapter.
CAUTION:
If your power adapter cable has a green
grounding wire, do not permit contact between the
green grounding wire and power leads because
electrical shock, fire, or damage to your computer
can occur.
3 If your AC power cable has a green grounding
wire for connection to an electrical outlet,
connect the metal grounding connector to the
grounding source (often a screw) on the outlet
(see the following illustration):
a
Loosen the grounding source.
b
Slide the metal grounding connector behind the grounding source,
and then tighten the grounding source.
book.book Page 23 Friday, October 17, 2008 4:02 PM