NISSAN 2008 Nissan Altima - Manual (Page 109)

WARNING
When the daytime running light system is
active, tail lights on your vehicle are not
on. It is necessary at dusk to turn on your
headlights. Failure to do so could cause
an accident injuring yourself and others.
INSTRUMENT BRIGHTNESS
CONTROL
The instrument cluster illuminates when the igni-
tion switch is in ON position.
The instrument brightness control operates when
the headlight control switch is in the
AUTO, or position.
Turn the control left or right to adjust the bright-
ness of instrument panel lights when driving at
night.
The instrument brightness control will not adjust
the brightness when the headlights or parking
lights are off.
TURN SIGNAL SWITCH
Turn signal
᭺
1 Move the lever up or down to signal the
turning direction. When the turn is com-
pleted, the turn signals cancel automatically.
Lane change signal
᭺
2 To signal a lane change, move the lever up or
down to the point where the indicator light
begins to flash, but the lever does not latch.
LIC1066 LIC1088
Instruments and controls 2-31
੬
REVIEW COPY— 2008 Altima (alt)
Owners Manual—USA_English (nna)
02/13/08—debbie
੭