HP LaserJet 1300 - Manual (Page 106)

98 Chapter 6 ENWW
7 Snap both sides of the separation pad firmly into place.
CAUTION Make sure that the separation pad is straight and that there is no space between the separation pad
and the spring-loaded base. If the separation pad is not straight or you see space on one side,
remove the separation pad, make sure that the larger tab is on the right, reinsert the separation pad,
and snap both sides into place.
8 Reinsert the pickup roller, print cartridge, and input trays. Plug the printer in to turn it back on.