HP LaserJet 1300 - Manual (Page 155)

ENWW Troubleshooting the print server 147
Print server status light
The status light on the back of the print server can indicate problems with the print server. Use the
table below to interpret the print server status light.
Print server status light
Light behavior Description
Off The print server is not receiving power.
On (solid green) The print server is on and ready.
Blinking slowly (amber) An error occurred during a self-test or operation. Disconnect and reconnect
the print server. If the problem still exists, reinstall the print server software.
Blinking slowly (green) The print server is receiving power, but it is not ready, or a self-test might be
in progress. Wait for the light to turn solid green.
The print server might have lost its connection to the network. Check the
10/100 link lights, which are located near the network connection. If the 10
and 100 link lights are both off, there is no network connection.
Blinking quickly (green) The print server is processing the configuration page. Wait until the
configuration page finishes.
Flashing intermittently (green) The print server is on and ready, and there is activity on the network.