HP laserjet m1212nf - Manual (Page 178)

Use the HP Embedded Web Server (M1210 Series
only)
Use the HP Embedded Web Server (EWS) to view product and network status and to manage printing
functions from a computer.
● View product status information
● Determine the remaining life on all supplies and order new ones
● View and change the product default configuration settings
● View and change network configuration
You do not need to install any software on the computer. You only need to use one of these supported
Web browsers:
● Internet Explorer 6.0 (and later)
● Firefox 1.0 (and later)
● Mozilla 1.6 (and later)
● Opera 7.0 (and later)
● Safari 1.2 (and later)
● Konqueror 3.2 (and later)
The HP Embedded Web Server works when the product is connected to a TCP/IP-based network. The
HP Embedded Web Server does not support IPX-based connections or direct USB connections.
NOTE: You do not have to have Internet access to open and use the HP Embedded Web Server.
However, if you click a link on any of the pages, you must have Internet access to go to the site
associated with the link.
Open the HP Embedded Web Server
To open the HP Embedded Web Server, type the IP address or host name of the product in the address
field of a supported Web browser. To find the IP address or host name, print a configuration page.
NOTE: If an error occurs while opening the HP Embedded Web Server, confirm that the proxy
settings are correct for your network.
TIP: After you open the URL, bookmark it so that you can return to it quickly in the future.
164 Chapter 11 Manage and maintain the product ENWW