HP laserjet m1212nf - Manual (Page 32)

Table 2-6 Fax setup menu (continued)
Menu Item Sub-menu item Sub-menu item Description
Rings to answer Sets the number of rings that must occur before the fax
modem answers.
Answer Ring
Type All Rings
Single
Double
Triple
Double&Triple
Allows you to have two or three phone numbers on a single
line, each with a different ring pattern (on a phone system
with distinctive-ring service).
● All Rings: The product answers any calls that come
through the telephone line.
● Single: The product answers any calls that produce a
single-ring pattern.
● Double: The product answers any calls that produce
a double-ring pattern.
● Triple: The product answers any calls that produce a
triple-ring pattern.
● Double&Triple: The product answers any calls that
produce a double-ring or triple-ring pattern.
Extension Phone On
Off
When this feature is enabled, you can press the 1-2-3
buttons on the extension phone to cause the product to
answer an incoming fax call.
Silence detect On
Off
Sets whether the product can receive faxes from older
model fax machines that do not emit the initial fax tones
used during fax transmission.
Fit to page On
Off
Shrinks faxes that are larger than Letter-size or A4-size so
that they can fit onto a Letter-size or A4-size page. If this
feature is set to Off, faxes larger than Letter or A4 will print
on multiple pages.
Stamp faxes On
Off
Sets product to add the date, time, sender's phone number,
and page number to each page of the faxes that this
product receives.
Forward fax On
Off
Sets product to send all received faxes to another fax
machine.
Block faxes Add entry
Delete entry
Clear all
Modifies the blocked fax list. The blocked fax list can
contain up to 30 numbers. When the product receives a
call from one of the blocked fax numbers, it deletes the
incoming fax. It also logs the blocked fax in the activity log
along with job-accounting information.
Reprint faxes On
Off
Sets whether all received faxes stored in available memory
can be reprinted.
18 Chapter 2 Control panel menus (M1210 Series only) ENWW