Link speeds and duplex settings – HP laserjet m1212nf User Manual

Page 58

Advertising
background image

Link speeds and duplex settings

NOTE:

In this section duplex refers to bi-directional communication, not two-sided printing.

Use the Networking tab in the embedded Web server to set the link speed if necessary.

Incorrect changes to the link speed setting might prevent the product from communicating with other

network devices. For most situations, leave the product in automatic mode. Changes can cause the

product to turn off, and then on. Make changes only when the product is idle.

44

Chapter 5 Connect the product

ENWW

Advertising