HP laserjet m1212nf - Manual (Page 99)

3. Press the arrow buttons to adjust the number of copies.
4. Press the Start Copy button to start copying.
Create multiple copies (M1210 Series)
1. Load the document onto the scanner glass or into the document feeder.
2. Use the keypad to enter the number of copies.
3. Press the Start Copy button to start copying.
Copy a multiple-page original
M1130 Series: Load the first page onto the scanner glass, and press the Start Copy button.
Repeat this process for each page.
M1210 Series: Load a stack of original documents into the document feeder, and press the Start
Copy button.
Copy identification cards (M1210 Series only)
Use the ID copy feature to copy both sides of identification cards, or other small-size documents, onto
the same side of one sheet of paper. The product scans half of the image area, prompts you to turn the
document over, and then scans again. The product prints both images at the same time.
1. Place the first side of the document face-down on the scanner glass.
2. Press the Copy Settings button three times to open the ID Copy menu. Press the OK button.
3. The product scans the first page of the document and then prompts you to load the next page.
Open the scanner lid and turn the document over, place it on a different portion of the scanner
glass, and then press the OK button.
ENWW Use copy functions 85