Samsung t139 - Manual (Page 80)

76
2. Press to return to the Idle mode.
Configuring Camera Options
In Capture mode, you can use various options for the camera
module by pressing the Menu soft key.
The following options are available:
• Shooting Mode : allows you to assign what sequence is followed when
a photograph is taken.
• Single shot: takes a single photo and allows you view it before
returning to the shooting mode.
• Size : sets the image size to 640x480, 320x240, 128x160, or 128x96.
• Timer : allows you to set a time delay before the camera takes the
photo. Select the length of delay you want (Off, 3 seconds, 5 seconds
or 10 seconds). When you press the Camera button or , the
camera takes the photo after the specified time has elapsed.
• White balance: allows you to set this option from the following
choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
• Effects : allows you to change the color tone or apply special effects to
the photo.
• Options include: No Effects, Black & White, Negative, Sepia,
Emboss, Sketch, and Antique.
• Set default destination : allows you to Remove a current destination
location or Change the current location by establishing a new folder in
which to place the pictures.
• Camera shortcuts: allows you to view a quick list of shortcuts such
as 2-change the photo size, 3-setting a delay timer, or # setting the
view finder.
• Settings:
• General settings: There are two types of general settings: Zoom
sound (creates a sound when you zoom the camera) and
Brightness sound (creates a sound when you adjust the brightness).
You can activate (turn On) or deactivate (turn Off) these sounds.
• Camera settings: consist of the following:
– Shutter sound: allows you to select a tone to play when the camera’s
shutter opens and closes. Sound selections are Shutter1, Shutter2, and
Shutter3.
– Viewfinder mode: allows you to set the view finder to Full screen, Full
screen & Indicator, Full screen & Guideline, or Actual screen.
– Scene program: allows you to set the camera options to capture
normal or night scene.
– Exposure metering: allows you to set how the camera measures or
meters the light source: Normal, or Center-weighted, or Spot.
– Single shot: allows you to select whether you want the single shot
option set to Take and Send or Take and Preview.