Canon EOS 50D - Manual (Page 29)

29
Although the thickness is different between the two types of CF cards,
either one can be inserted into the camera. Also, Ultra DMA (UDMA)
cards and hard disk-type cards can be used.
1
Open the cover.
Slide the cover as shown by the
arrow to open it.
2
Insert the card.
As shown in the illustration, face
the label side toward you and
insert the end with the small holes
into the camera.
If the card is inserted in the wrong
way, it may damage the camera.
X The card ejection button will stick out.
3
Close the cover.
Close the cover and slide it in the
direction shown by the arrow until it
snaps shut.
X When you set the power switch to
<1> or <J>, the number of
remaining shots will be displayed on
the LCD panel.
Installing and Removing the CF Card
Installing the Card
Label side
Card ejection button
Shots remaining
The number of shots remaining depends on the remaining capacity of
the card, image-recording quality, ISO speed, etc.
Setting the [1 Shoot w/o card] menu option to [Off] will prevent you
from forgetting to install a card (p.193).
COP
Y