Canon PowerShot S95 - Manual (Page 157)

Changing Camera Settings
157
Changing the Start-up Screen
You can change the start-up screen that appears when you turn on the
camera.
● Choose [Start-up Image], then press the
m button.
● Press the qr buttons or turn the Ê dial to
choose an option.
Registering Recorded Images as the Start-up
Screen
When you press the 1 button and set the camera to Playback mode, you can
register an image.
● Choose [Start-up Image], then press the
m button.
● Press the qr buttons or turn the Ê dial to
choose [3], then press the m button.
● Press the qr buttons or turn the Ê dial to
choose an image, then press the m
button.
● Press the qr buttons or turn the Ê dial to
choose [OK], then press the m button to
complete registration.
No start-up image
1, 2 Preset images (cannot be modified)
3
Preset images
You can set recorded images, and use the
included software to change the images.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
COP
Y