Panasonic KX-TG4011 - Manual (Page 21)

Programming
21 For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 When the ringer volume is turned off, “Ringer off” is displayed and the handset
does not ring for outside calls. However even when the ringer volume is set to off,
the handset still rings for intercom calls and paging (page 34).
*3 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers.
*4 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*6 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at “700 ms” unless pressing
{
FLASH} fails to pick up the waiting call.
*7 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*8 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
Initial setting Ringer settings Ringer volume
*2
<Level 6>
–
Ringer tone
*3, *4, *5
<Tone 1>
–
Display
settings Change language
<English> 13
Contrast <Level 3> –
Set tel line Set dial mode
*1
<Tone>
14
Set flash time
*1, *6
<700 ms>
16
Privacy mode
*1
<Off>
– 17
Registration HS registration
(HS: handset) 23
Deregistration 23
Key tone
*7 <On> – –
Auto talk
*8 <Off> – 16
Caller ID edit
<On> – 25
Date and time
*1 – – 14
Customer support
*9 – – –
Main menu Sub-menu 1 Sub-menu 2 Page
TG401x.book Page 21 Friday, December 3, 2010 1:36 PM