Dsp algorithm list e-90 – Casio CTK-691 User Manual
Page 92
DSP Algorithm List
E-90
Parameters
J
10 :Phaser
Function
This is a monaural phaser that modulates the phase in
accordance with a sine wave LFO.
Parameters
J
11 :Rotary
Function
This is a rotary speaker simulator.
Parameters
J
12 :Drive Rotary
Function
This is an overdrive - rotary speaker simulator.
Parameters
J
13 :Enhancer
Function
Enhances the outlines of the low range and high range of
the input signal.
Parameters
0 :
Resonance (Range: 0 to 127)
Adjusts the resonance of the sound.
1:
Manual (Range: –64 to 0 to +63)
Adjusts the phaser shift volume, which is used
for reference.
2:
Rate (Range: 0 to 127)
Adjusts the rate of the LFO.
3:
Depth (Range: 0 to 127)
Adjusts the depth of the LFO.
4:
Wet Level (Range: 0 to 127)
Adjusts the volume level of the effect.
0:
Resonance (Range: 0 to 127)
Adjusts the resonance of the sound.
1:
Manual (Range: –64 to 0 to +63)
Adjusts the phaser shift volume, which is used
for reference.
2:
Rate (Range: 0 to 127)
Adjusts the rate of the LFO.
3:
Depth (Range: 0 to 127)
Adjusts the depth of the LFO.
4:
Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
0:
Speed (Range: Slow, Fast)
Switches the speed mode between fast and
slow.
1:
Break (Range: Rotate, Stop)
Stops speaker rotation.
2:
Fall Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is
switched from fast to slow.
3:
Rise Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is
switched from slow to fast.
4:
Slow Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the slow
speed mode.
5:
Fast Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the fast speed
mode.
0:
Overdrive Gain (Range: 0 to 127)
Adjusts overdrive gain.
1:
Overdrive Level (Range: 0 to 127)
Adjusts the output level of the overdrive.
2:
Speed(Range: Slow, Fast)
Switches the speed mode between fast and
slow.
3:
Break (Range: Rotate, Stop)
Stops speaker rotation.
4:
Fall Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is
switched from fast to slow.
5:
Rise Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is
switched from slow to fast.
6:
Slow Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the slow
speed mode.
7:
Fast Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the fast speed
mode.
0:
Low Frequency (Range: 0 to 127)
Adjusts the low range enhancer frequency.
1:
Low Gain (Range: 0 to 127)
Adjusts the low range enhancer gain.
2:
High Frequency (Range: 0 to 127)
Adjusts the high range enhancer frequency.
705A-E-092A