Humboldt H-4114SD.3F Electrical Density Gauge - Manual (Page 37)

Pressing the Data button will present you with the
following screen:
The EDG features Blue Tooth Capabilities, So if you computer works with
Blue Tooth enabled hardware, you can access the data in your EDG and
transfer it to your computer for use with the EDG software. To be able to
import data to your computer via Blue Tooth, you must turn on the Blue
Tooth Connection. This is accomplished by Pressing the ON next to Blue
Tooth Connection.
Once on, the radio button next to the word ON will be highlighted in Blue
and the Blue Tooth Logo will appear at the top left-hand corner of the
screen and the Power Light above the Power Button on the console will be
blinking with a Blue light.
Data can also be transferred to a computer by using the USB port located
above and to the left of the Touch Screen. The EDG comes supplied with
a USB thumb drive, which can be used to transfer files to a computer or
another gauge.
34