Humboldt H-1068 Series Ductility Testing Machines - Manual (Page 6)

Accessories
Ductility Briquet Mold— H-1030
Mold for making test briquets for use with any ductility testing machine. H-1030
Briquet Mold has straight sides for use in forced tests. Requires H-1090 or
H-1090.3 base plates. Four accurately machined interlocking brass segments
are interchangeable with same parts from different molds; no parts identification
marks are needed for matching. End pieces, designed to hold specimens
being elongated, are provided with mounting holes. Meets ASTM D5892,
D6084, AASHTO T51.
Ductility Briquet Mold— H-1032
Mold for making test briquets to meet AASHTO T301
Ductility Briquet Mold— H-1080
Same as above, but mold has angled sides for use in standard test.
Meets ASTM D113
Base Plate— H-1090
Brass base plate for single mold. Flat surface provides uniform contact with
bottom surfaces mold. 5-1/2" x 2" x 1/8"
Base Plate, Triple Mold— H-1090.3
Brass base plate for triple mold. Flat surface provides uniform contact with
bottom surfaces mold. 5-1/2" x 8" x 1/8"
H-1030
H-1080
H-1090
H-1090.3