Humboldt H-1339B Marshall Compression Machine User Manual
Page 4
General Information
Inspection
Your Marshall equipment was thoroughly inspected before it was shipped
and should be ready to operate as soon as you have completed the set-up
procedure.
Notify Humboldt Mfg. Co. or your local agent and file a claim with any carriers
involved if you find any damage to the machine. Unpack all of the equipment
carefully to prevent loss of small items or manuals.
Physical Specification
Shipping weight: 185 lbs. (78.9 kg)
Overall height: 39"
Base dimension: 16" x 18" x 10"
Power Supply
110 VAC 60 Hz 1 phase (H-1339B), 375 watts
220 VAC 60 Hz 1 phase (H-1339B.2F), 375 watts
220 VAC 50 Hz 1 phase (H-1339B.5F), 375 watts
Check to make sure your machine has the correct voltage for your local supply.
Power Cord
Your Marshall Test Machine is fitted with a molded vinyl-grounding plug.
The cord is made of three conductors:
(American color-coding)
(International color coding)
Green Ground (Earth)
Green/Yellow Ground (Earth)
White Cold (Neutral)
Blue Cold (Neutral)
Black Hot (Live)
Brown Hot (Live)
Fuses
The Marshall Test Machine uses a slow-blow fuse that is fitted into the left side
of the machine. The replacement part number is H-1339.13.
Initial Installation
Remove the packing list and verify that all parts have been received. Normally
you will receive one crate comprised of compression frame and a calibrated
load ring (H-4454.100) 10,000lbf capacity.
Set the machine base up at the place it is to be used in the laboratory and
then check that it is level by placing a spirit level on the platen. If it is not level,
adjust the feet of the machine.