Humboldt H-1366 Marshall, Automatic, Single Compactor - Manual (Page 6)

Replacement Parts for Heavy-Duty, Automatic Single Compactors
Hammer Assemblies and Replacement Parts
Description Model
4" hammer with tapered foot (rotating mold) H-1360A
6" hammer with tapered foot (rotating mold) H-1360B
4" hammer with flat foot (stationary mold) H-1360AF
6" hammer with flat foot (stationary mold) H-1360BF
Lift Chain for H-1364, H-1366 Series H-1360.21
Replacement pedestal for H-1364 and H-1366 Compactors H-1347M
Replacement Counter and proximity switch for Compactors H-1334BA
Replacement Counter and proximity switch for Compactors, 230V H-1334BA.4F
Description Model
Compaction hammer, 10 lb (for 4" mold) H-1360A.30
Compaction hammer, 22.5 lb (for 6" mold) H-1360B.30
Hammer slide shaft H-1360A.32
Spring retainer, anvil H-1360A.32.1
Spring washer, anvil H-1360A.33
Hammer foot, 4" tapered H-1360A.35
Hammer foot, 4" flat H-1360AF.35
Hammer foot, 6" tapered H-1360B.35
Hammer foot, 6" flat H-1360BF.35
Hammer release pin, left hand H-1360A.37L
Hammer release pin, right hand H-1360A.37R
H-1360A H-1360B