Bissell 1190B - Manual (Page 5)

www.bissell.com
5
Your deep cleaner comes in two easy to
assemble components:
A. Upper handle
B. Portable spot cleaner/Base
The only tool you will need to assemble your
cleaner is a long Phillips screwdriver.
1. slide the upper handle onto the body of
the machine by guiding the 2 posts on the body
into the opening on the upper handle.
2. Firmly holding the upper handle in place,
screw 2 screws into the marked holes at an
upward angle above the support handle.
3. At an upward angle, screw the remaining
2 screws into the marked outermost holes
under the support handle.
4. Wrap power cord around Quick Release
Cord Wrap.
5. Wrap flex hose around the hose wrap and
secure with hose secure latch.
6. Align the product as image 4/5 shows and
firmly push down the portable spot cleaner
until it is secured on both sides.
To further check if the portable spot cleaner
is secure, plug in and turn on to verify that
the upright cleaning mode indicator light is
illuminated. if it does not illuminate, release the
pod and re-secure by pushing firmly until both
sides snap into place.
7. Check latches on both sides to confirm
it is secured. Refer to image 6.
8. snap attachment(s) into the back of unit.
NotE: portable spot cleaner must be fully
secure to operate in the upright cleaning mode.
cleaning fluid
Keep plenty of genuine bissell 2X cleaning
formula on hand so you can clean and protect
whenever it fits your schedule. Always use
genuine bissell deep cleaning formulas.
Non-bissell cleaning formulas may harm the
machine and will void the guarantee.
Assembly
650 mL
Stain Pretreat
#1147E
1.5L 2X Wash
& Refresh Natural
Orange Formula
#1146E
1.5 L 2X Wash &
Protect PET Pet Stain
& Odour Formula
w/ Scotchgard
™
Protector
#1087E
1.5 L 2X Wash & Protect
PRO Professional
Stain & Odour
Formula w/
Scotchgard
™ Protector
#1089E
1.5 L 2X Wash
& Protect Stain
& Odour Formula
w/ Scotchgard
™
Protector
#1086E
1.5 L 2X Wash &
Refresh Blossom &
Breeze Fragrance
Formula w/
Febreze® Freshness
#1078E
1.5 L 2X Wash &
Refresh Cotton
Fresh Formula w/
Febreze® Freshness
#1079E
A. B.
1.
3.
6.
4./5.
2.
IMPORTANT
ASSEMBLY INSTRUCTIONS
Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver for assembly.
Slide the upper handle onto
the body of the machine by
guiding the 2 posts on the
body into the opening on
the upper handle. Firmly holding the upper
handle in place, screw 2
screws into the marked
holes at an upward angle
above the support handle. At an upward angle, screw
the remaining 2 screws into
the marked outermost holes
under the support handle.
IMPORTANT
ASSEMBLY INSTRUCTIONS
Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver for assembly.
Slide the upper handle onto
the body of the machine by
guiding the 2 posts on the
body into the opening on
the upper handle. Firmly holding the upper
handle in place, screw 2
screws into the marked
holes at an upward angle
above the support handle. At an upward angle, screw
the remaining 2 screws into
the marked outermost holes
under the support handle.
IMPORTANT
ASSEMBLY INSTRUCTIONS
Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver for assembly.
Slide the upper handle onto
the body of the machine by
guiding the 2 posts on the
body into the opening on
the upper handle. Firmly holding the upper
handle in place, screw 2
screws into the marked
holes at an upward angle
above the support handle. At an upward angle, screw
the remaining 2 screws into
the marked outermost holes
under the support handle.
Cord
side
Hose
side
WARNING
Do not plug in your cleaner until you have completely
assembled it per the instructions and are familiar with all
instructions and operating procedures.
WARNING
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning fluids
intended for use with the deep cleaner.