Bissell 22K7B - Manual (Page 6)

w w w. b i s s e l l . c o m
A
ssembly
6
Your CleanView ® Lift-Off ® comes in two
easy to assemble components:
1. Upper handle
2. Portable spot cleaner/Base
The only tool you will need to
assemble your cleaner is a Phillips
screwdriver.
1. Slide upper handle onto base
2. Screw the four included screws into the
marked holes.
Note: two of the holes are located
underneath the support handle indi-
cated by graphics. Angle screwdriver
to secure into place.
3. Wrap power cord around Quick Release
Cord Wrap.
4. Wrap flex hose around the hose wrap
and secure with hose secure latch.
5. Snap attachment(s) into the back of unit.
Warning:
Do not plug in your
cleaner until you have
completely assembled it
per the above instructions
and are familiar with all
instructions and operat-
ing procedures.
1.
2.
1. 2.
Screw Holes