Bissell 18Z7E - Manual (Page 6)

w w w . b i s s e l l . c o m
A
ssembly
6
O
perations
Your CleanView ® Deep Clean comes in
three, easy to assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to
assemble your cleaner is a Phillips
head screwdriver.
1. Slide upper handle onto lower handle.
2. Screw 3 screws into the marked holes.
3. Place upper hose rack onto back of
upper handle, and secure with screw.
4. Place lower hose rack onto back of
upper handle by pushing in and sliding
down until it snaps into place.
5. Snap tools into the tool caddy.
6. Wrap power cord and flex hose.
7. Keep flex hose snugly in place by using
the hose secure latch.
Special features
Your BISSELL CleanView ® Deep Clean is
a home cleaning system that uses the
power of heat, brushes and cleaning
formula to get the deep down dirt for a
maximum clean. Not only does it come
with a lot of unique features, it has
been designed with you, the customer,
in mind.
Built-in-heater feature
BISSELL CleanView ® Deep Clean models all
feature a patented built-in heater which will
heat the hand hot tap water you put in up to
14° C hotter to safely optimise cleaning effec-
tiveness. The heater will never allow the tem-
perature to exceed 82° C. The heater switch on
the front of the machine controls the heater so
you have the option to turn off the heat if you
are cleaning delicate wool or oriental rugs.
Hose Secure Latch
1.
3.
2.
4.
7.