Bissell 18Z7E - Manual (Page 7)

w w w . b i s s e l l . c o m
7
O
perations
Custom Clean™
The Custom Clean feature automatically mixes
hand hot tap water with the BISSELL 2X formula.
Simply choose one of the 4 settings (heavy
traffic, normal clean, light clean, or water rinse)
and the CleanView ® Deep Clean will adjust the
right amount of cleaning solution to mix with the
heated water to fit your cleaning need.
CleanShot™
The CleanShot feature gives you the ability to
tackle tough stains with the push of a button.
Cleaning solution is sprayed in a concentrated
stream, penetrating the stain and allowing for
better cleaning focus. Simply spray and suc-
tion and the stain is gone! CleanShot is espe-
cially effective for spots and stains that would
otherwise take a lot of deep cleaning cycles
to remove. It allows the cleaning formula and
machine to do the work for you.
DryAire™
The Dry Aire system spreads hot air across the
carpet to aid in drying. The feature runs while
your machine is powered.
Flow indicator
The flow indicator is located on the rear cover
of your unit. When the unit runs out of water or
solution the flow indicator will instantly let you
know
2-in-1 water tank
Our 2-in-1 water tank full capacity system is
designed with a heavy duty bladder inside for
clean water. As you clean, the clean water in the
bladder will empty and mix with the cleaning
formula. Dirty water pulled out of your carpets
will collect around the outside of the bladder so
that clean and dirty water are always kept sepa-
rate. This allows the user to only carry one tank
to and from the sink for emptying and filling.
Microban
®
antibacterial protection
Microban antibacterial protection helps prevent
the growth of harmful common household bacteria
including E. coli, Salmonella and Staph. a. It
helps to keep the unit fresher and cleaner between
uses.
Flow Indicator
(located on upper handle)
CleanShot ™
Dry Aire™