Bissell 92T7 - Manual (Page 11)

w w w . b i s s e l l . c o m
11
O
perations
Manual cleaning continued
10. Press the STOP button to turn off the
Healthy Home Spot Clean.
11. Disconnect the cleaning tool from the
vacuum flex hose by pushing down on
the button lock and pulling straight off
(do not twist tools to remove them).
12. Once the tool is removed from the hose
it should be rinsed under clean running
water. When thoroughly dried, place back
into the storage area.
Storage
1. Unplug the power cord from the outlet.
Wrap power cord around the cord wrap.
2. Empty and rinse the dirty water/
collection tank after each use, or
when dirty water reaches the indicated
maximum fill line. To remove the dirty
tank, lift up the dirty tank latch and pull
the tank out. Dump out the dirty water
and rinse. Replace the dirty tank into the
unit for storage. After using the Healthy
Home Spot Clean’s automated feature,
wipe the window and brushing area
with a soft cloth.
3. If you were using your Healthy Home Spot
Clean manually, wrap the vacuum flex
hose around the unit and secure the hose
into the hose connector on the front of the
unit.
4. Store unit indoors at room temperature
(4° to 43°C).
2. 3.
11.
Tip:
If a significant amount of
water and formula remains
in the clean tank, your unit
can be stored with liquid in
the clean tank. However, if
you have added Oxy GEN2
into the clean tank, fresh Oxy
GEN2 should be added prior
to the next use to optimize
performance.
Tip:
Periodically clean out the
black valve inside of the dirty
water/collection tank.