Bissell 92T7 - Manual (Page 6)

w w w . b i s s e l l . c o m
O
perations
6
Special features front view
Clean water/solution tank
Looking at the front of the unit, the clean water/
solution tank is on the right side. It holds the
clean water and formula.
Automatic Smart System™ control paneI
Located on top of the unit, you will find the
control panel. Select the cleaning cycle you
would like to use (detailed instructions on
page 8).
Dirty water/collection tank
Looking at the front of the unit, the dirty
water/collection tank is on the left side. It
holds the dirty water that is suction up
Vacuum flex hose
Wraps around the center of the unit, and
serves as the travel path for dirty water and
formula suctioned into the dirty water/collec-
tion tank.
Tough Stain Brush™
Attach to the end of the hose for cleaning in
manual mode.
Spray trigger
When cleaning in the manual mode, press
the spray trigger to release water and formula
onto the area to be cleaned.
Special features underside view
Handsfree cleaning brushes
Provides cleaning action when using the surface
stain or set-in handsfree cleaning cycles.
Spray tip
Water and formula are dispensed here when
cleaning in the handsfree mode.
Suction nozzles
Provides suction path for dirty water and formula
when using the handsfree cleaning cycles.
Special features back view
Cleaning window
Provides an area to see the handsfree
cleaning action.
Tough Stain Brush™ Storage
The Tough Stain Brush is conveniently stored on
board.