Bissell 93R4e - Manual (Page 12)

www.BISSELL.com
12
Troubleshooting
Problem Possible causes Remedies
Reduced
spray OR
no spray in
upright mode
Solution tank empty Refill tank with water and formula
Lint screen on solution tank cap
clogged
Soak solution tank cap in warm water
and then rinse under running water
Reduced
spray OR
no spray in
attachment
Solution tank empty Refill tank with water and formula
Spray nozzle clogged Clean spray nozzle by rinsing
tool under water
Pump needs priming Place tool on floor and press
spray trigger
Machine is reclined Return machine to full upright
position until it locks into place
ReadyTools dial is set to “FLOOR
CLEANING”
Choose “TOOLS” setting on
ReadyTools dial
Deep cleaner
not picking
up solution
Collection tank not aligned/
secured
Check tank alignment and secure
with side latches
Collection tank full Empty tank
Removable nozzle installed
improperly
Unplug unit. Align four "hooks" on
nozzle into bottom first, then snap
into place on top
Removable nozzle full of debris Unplug unit. Remove nozzle and
rinse under running water
Red lint screen under collection
tank clogged
Remove debris from lint screen
ReadyTools dial not set properly Choose either “FLOOR CLEANING”
or “TOOLS” for desired cleaning
method
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do
not return
this product
to the store.
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.