Bissell 93R4e - Manual (Page 5)

www.BISSELL.com
5
Your deep cleaner assembles quickly and
easily. The only tool you will need for assembly
is a Phillips head screwdriver.
1. Slide upper body onto lower body.
2. Secure with screws.
3. Attach hose wrap to upper handle by
sliding it up the bottom of the handle until
it snaps firmly in place.
4. Slide upper handle into upper body,
until it will not go any further and
secure with screw.
5. Place solution tank on back of unit.
6. Wrap power cord and flex hose.
7. Keep flex hose snugly in place by using the
hose secure latch.
8. Attach tool to end of hose.
Assembly is now complete.
Assembly
WARNING
Do not plug in your deep cleaner until you have completely
assembled it per the instructions and are familiar with all
instructions and operating procedures.
1.
3.
5.
7.
2.
4.
6.
8.