Bissell 12R8E - Manual (Page 5)

5
w w w . b i s s e l l . c o m
B2.
A
ssembling your vacuum
1. Connect swivel hose by squeezing both
locking buttons and inserting it into the
suction opening on the canister. Once the
swivel hose is inserted in the suction opening,
release the locking buttons.
2. Connect telescoping extension wand to the
handle end of the flex hose. Twist slightly to
tighten.
3. Connect Pet Hair Eraser floor nozzle to the
end of the telescoping extension wand. Twist
slightly to tighten.
4. Once assembled, you can store your vacuum
in one of two positions:
A. Storing in the in-use position:
1.To store with the Pet Hair Eraser floor
nozzle attached, insert the storage clip
(located on the back of the Pet Hair
Eraser floor nozzle) into the storage slot
on the rear of the vacuum.
2.To store without the Pet Hair Eraser floor
nozzle attached, insert the storage clip
(located on the bottom of the telescoping
extension wand) into the storage slot on
the rear of the vacuum.
B. Storing in the upright position:
1.To store with the Pet Hair Eraser floor
nozzle attached, stand the vacuum in
the upright position and insert the
storage clip (located on the back of
the Pet Hair Eraser floor nozzle) into
the storage slot on the bottom of the
vacuum.
2.To store without the Pet Hair Eraser
floor nozzle attached, stand the
vacuum in the upright position and
insert the storage clip (located on the
bottom of the telescoping extension
wand) into the storage slot on the
bottom of the vacuum.
1.
A1.
Storing in the in-use position
Storing in the upright position
3.
B1.
2.
A2.
WARNING:
Plastic film can be dangerous.
To avoid danger of suffocation,
keep away from babies and
children.