Bissell 12R8E - Manual (Page 8)

8
w w w . b i s s e l l . c o m
O
perations
Pet Hair Eraser Floor Nozzle
Use to pick up pet hair from rugs and carpeted
surfaces. Just vacuum like you normally would.
The Pet Hair Lifter will grab pet hair when you
pull back and it will release the hair and suction
it up when you push forward.
NOTE: Turn the vacuum off before you flip
up or flip down the Pet Hair Lifter.
1. To vacuum rugs and carpeted surfaces, flip
down the Pet Hair Lifter until it clicks into
place on the front of the Pet Hair Eraser
Floor Nozzle. Then push the brush switch to
the carpet position to pull the
brushes up into the Pet Hair Eraser Floor Nozzle.
2. To vacuum bare floors, push the brush
switch to the bare floor position to
extend the brushes down from the Pet Hair
Eraser Floor Nozzle. Then flip up the Pet Hair
Lifter by pushing the yellow release button.
This will flip the Pet Hair Lifter up and out of
the way.
1.
Brush Down
Brush Up
Tip:
Hair, string and small objects
can block the hose and tools.
Check them occasionally for
obstructions.
NOTICE:
These tools are designed to
remove pet hair from upholstered
or carpeted surfaces. They should
not be used on pets.
2.
Release Button