Bissell 40N8 - Manual (Page 11)

11
w w w . b i s s e l l . c o m
M
aintenance and care
Washable Pre-
Motor Filter
NotIcE:
this product is intended for household
use only and not for commercial or
industrial use. vacuuming of dust
from products like plaster, concrete or
ashes will damage the motor and void
the warranty.
Tip:
For maximum cleaning performance,
check the filters often and clean or
replace if necessary.
WaRNING:
Do not operate cleaner
with damp or wet
filters or without all
filters in place.
3.
Cleaning the pre-motor filter
the pre-motor filter protects the motor from
dirt and dust particles. Use only bISSEll
replacement filters in your Easy vac
compact.
1. Remove the dirt cup from the vacuum,
following steps 1-3 of Emptying the dirt cup
on page 9.
2. The pre-motor filter is located between the
power button and the automatic cord rewind
button.
3. The pre-motor filter can be hand washed in
cold water with a mild detergent. Rinse well
and air dry thoroughly before placing back
into the vacuum.