Bissell 61Z4 - Manual (Page 15)

w w w. b i s s e l l . c o m
15
M
aintenance and care
changing the light bulb
1. Turn power switch off.
2. Unplug vacuum from electrical outlet.
3. Recline handle for easier access to light
bulb and remove 2 screws to lift off lens.
4. Remove the bulb by grasping bulb and
pulling straight out of the socket. Install
the new bulb by pushing gently into the
socket until the bulb snaps into place.
turbobrush ™ tool maintenance
the turbobrush tool should be checked
regularly for clogs or debris wrapping
around the brush.
1. Remove tool from hose or front of vacuum.
2. Twist collar so opening is at the top and
lift top cover to remove.
3. Remove the brush from the belt and clean
debris.
4. Replace the brush inside the belt and
place ends into slots on sides as shown.
5. Reposition top cover making sure to line
up inside tab at the front with the opening
on the cover. Twist collar until opening is
at the bottom to lock into place.
3.
4.
2.
Inside Tab
4.
5.