Dogtra eF-3000 Gold - Manual (Page 6)

9
COLLAR
8
TRANSMITTER
Wall-Mount Transmitter
Use the (2) included screws to mount the transmitter to a wall securely
near an outlet. The unit will withstand freezing temperatures, but it is not
waterproof. Therefore, we recommend mounting the transmitter in a safe,
dry sheltered area such as a shed, garage or carport. Plastic anchors have
been provided to secure mounting onto drywall. Use a 1/4 drill bit to
make holes into the drywall. Insert the anchors into the holes so that the
open end faces out and mount the transmitter by inserting the screws into
the open end of the anchors.
To power the wall transmitter, plug the AC daptor into the standard 120-
volt outlet and connect it to the adaptor receptacle of the transmitter.
120-volt
25V 500mA
DESCRIPTION OF COLLAR PARTS
Indicator Light
Contact Points
Battery Charging
Receptacle
Intensity Selection Dial
Collar Strap
Receiver
Adaptor Receptacle
Adaptor Receptacle
Plug the 120-volt adaptor into a 120-volt wall outlet and insert the adaptor
plug into the adaptor receptacle of the transmitter.