Dustless D5ZZZ AIRPOD User Manual

Save these instructions, Introduction

Advertising
background image

INSTRUCTION MANUAL FOR MODEL D5252
VACPOD, D5250 TOOLPOD, AND D5ZZZ AIRPOD.

INTRODUCTION:

Model D5252 Wireless VacPod receiver modules are meant to be used in conjunction with ToolPod or AirPod transmitter
modules. When the ToolPod or AirPod transmitter is activated a unique signal from that transmitter will be sent. If there
is a VacPod receiver module trained to receive that signal, the VacPod will allow electricity to pass through and activate
the vacuum or tool connected to the module. Note: This manual uses ToolPod and AirPod interchangeably. The only
difference between the AirPod and ToolPod is the AirPod activates with the flow of an Air Tool and the ToolPod activates
with the flow of electricity to a tool.

***GENERAL SAFETY RULES AND WARNING:
Read and understand all instructions. Failure
to follow all instructions listed below may
result in electric shock, fire, property damage
and/or serious personal injury.

***WARNING: Do not use any VacPod product
to control any device where unexpected or
unattended turn on/off could cause serious
personal injury and/or property damage.
Interference, interruptions, or surges in the
electrical system, or malfunction may cause
unexpected turn on/off of plugged in devices.

***WARNING: Do not use any VacPod product
to control any device where failure to operate
could cause serious personal injury and/or
property damage. Interference, interruptions
or surges in the electrical system, or
malfunction may cause plugged in devices
to fail to operate as expected.

***WARNING: Do not use any VacPod product
to control any medical device. Using any
VacPod product to control any type of medical
device could result in serious personal injury.

***WARNING: Do not use any VacPod product
to control any device that exceeds the rating
for that VacPod product. Using a VacPod
product to control a device that exceeds the
rating for that product could result in serious
personal injury and/or property damage. The
ratings for VacPod products are as follows:

Model D5252 12A

If the VacPod product you intend to use is
not listed here, consult the instruction manual
for that product or call 1-435-637-5885 to
determine the applicable rating before
plugging in or using that VacPod product.

***WARNING: To reduce the risk of electric
shock or fire, do not expose any VacPod
product to rain or moisture. If a VacPod
product is exposed to rain or moisture, imme-
diately disconnect the product from the AC
outlet to reduce the risk of electric shock or
fire and consult authorized service personnel.

***WARNING: To reduce the risk of electric
shock, do not disassemble any VacPod
product. No user-serviceable parts are inside.

***WARNING: To reduce the risk of electric
shock, do not use any type of plug adaptor
with this product.

***WARNING: If unintended operation of
any VacPod product is observed, unplug all
products immediately until (1) the source of
the interference is identified and eliminated.
If you cannot identify the source of interfer-
ence by talking with others who are using a
VacPod system, or if you have any questions
about identifying or eliminating interference,
please call 1-435-637-5885 before plugging in
or using any VacPod product. Remember
to exercise good common sense when using
your VacPod system. Especially when
attaching unattended devices to the system.
There can be unexpected consequences if
VacPod products are not used with care.
For example, a machine can be remotely
turned on due to unintended operation or
interference from a neighboring untrained
VacPod system. If that should happen, your
machine could be damaged from overheating,
which in turn could cause a fire or create a
risk of electrical shock. As another example,
if a machine is turned on unexpectedly while
not adequately ventilated, a fire could result.
Accordingly, DO NOT USE the VacPod system

for the control of medical devices, heating
appliances, such as portable heaters, or any
other appliance or device that could cause
physical injury or property damage if turned
on or off while unattended. Similarly, DO
NOT USE the VacPod for the control of any
appliance or device that could cause physical
injury or property damage if it fails to operate
as expected. Interference, interruptions or
surges in the electrical system, or malfunction
may cause plugged in appliances or devices
to fail to operate as expected. For these rea-
sons, it is important to read, understand and
follow all instructions in this manual, and to
consider carefully the potential consequences
of unattended or unexpected operation, or
failure to operate, of an appliance or device
before you attach it to a VacPod system.

***WARNING: To reduce the risk of electric
shock, do not use any type of plug adaptor
with this product.

***WARNING: To reduce the risk of electric
shock, this equipment has a grounding type
plug, that has a third (grounding) pin. This
plug will only fit into a grounding type outlet.
If the plug does not fit into the outlet, contact
a qualified electrician to install the proper
outlet. Do not change the plug in any way.

SAVE THESE INSTRUCTIONS

435.637.5885

1285 East 650 South

Price, Utah 84501

dustlesstechnologies.com

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction. Many cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.

CAUTION: Any changes or modification not express approved by Dustless Technologies, Inc. could void the user authorization to operate this equipment.

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Advertising
This manual is related to the following products: