Dustless D5252 TOOLSYNC User Manual
Save these instructions, Introduction
INSTRUCTION MANUAL FOR MODEL D5252
WIRELESS TOOLSYNC RECEIVER MODULES
INTRODUCTION:
Model D5252 Wirelss ToolSync W Receiver modules are meant to be used in conjunction with
ToolSync transmitter modules. When the ToolSync transmitter module is activated, the ToolSync
W Receiver will allow current to pass through and activate the tool connected to the module.
The most common tool will be an existing vacuum system without ToolSync capability built in.
***GENERAL SAFETY RULES AND WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result
in electric shock, fire, property damage and/or
serious personal injury.
***WARNING: Do not use any TOOLSYNC
product to control any device where unexpected
or unattended turn on/off could cause serious
personal Injury and/or property damage.
Interference, interruptions, or surges in the
electrical system, or malfunction may cause
unexpected turn on/off of plugged in devices.
***WARNING: Do not use any TOOLSYNC
product to control any device where failure to
operate could cause serious personal injury
and/or property damage. Interference,
interruptions or surges in the electrical system,
or malfunction may cause plugged in devices
to fail to operate as expected.
***WARNING: Do not use any TOOLSYNC
product to control any medical device. Using
any TOOLSYNC product to control any type
of medical device could result in serious
personal injury.
***WARNING: Do not use any TOOLSYNC
product to control any device that exceeds the
rating for that TOOLSYNC product. Using a
TOOLSYNC product to control a device that
exceeds the rating for that product could result
in serious personal injury and/or property
damage. The ratings for TOOLSYNC products
are as follows:
Model D5252 - 120V 12A
Model D5252-240 240V 12A
If the TOOLSYNC product you intend to use
is not listed here, consult the instruction
manual for that TOOLSYNC product or call
1-800-568-3949 to determine the applicable
rating before plugging in or using that
TOOLSYNC product.
***WARNING: To reduce the risk of electric
shock or fire, do not expose any TOOLSYNC
product to rain or moisture. If a TOOLSYNC
product is exposed to rain or moisture,
immediately disconnect the TOOLSYNC
product from the AC outlet to reduce the risk
of electric shock or fire and consult authorized
service personnel.
***WARNING: To reduce the risk of electric
shock, do not disassemble any TOOLSYNC
product. No user-serviceable parts are inside.
***WARNING: To reduce the risk of electric
shock, do not use any type of plug adaptor
with this product.
***WARNING: If unintended operation of any
TOOLSYNC product Is observed, unplug all
TOOLSYNC products immediately until (1) the
source of the interference is identified and
eliminated. If you cannot identify the source of
interference by talking with others who are
using a TOOLSYNC system, or if you have any
questions about identifying or eliminating
interference, please call 1-800-ZZZ-YYYY
before plugging in or using any TOOLSYNC
product. Remember to exercise good common
sense when using your TOOLSYNC system.
Especially when attaching unattended devices
to the system. There can be unexpected
consequences if TOOLSYNC products are
not used with care. For example, machine
can be remotely turned on due to unintended
operation or interference from a neighboring
untrained TOOLSYNC system. If that should
happen, your machine could be damaged
from overheating, which in turn could cause a
fire or create a risk of electrical shock. As
another example, if a machine is turned on
unexpectedly while not adequately ventilated,
a fire could result. Accordingly, DO NOT USE
the TOOLSYNC system for the control of
medical devices, heating appliances, such as
portable heaters, or any other appliance or
device that could cause physical injury or
property damage if turned on or off while
unattended. Similarly, DO NOT USE the
TOOLSYNC system for the control of any
appliance or device that could cause physical
injury or property damage if it fails to operate
as expected. Interference, interruptions or
surges in the electrical system, or malfunction
may cause plugged in appliances or devices to
fail to operate as expected. For these reasons,
it is important to read, understand and follow
all instructions in this manual, and to consider
carefully the potential consequences of
unattended or unexpected operation, or failure
to operate, of an appliance or device before
you attach it to a TOOLSYNC system.
***WARNING: To reduce the risk of electric
shock, do not use any type of plug adaptor
with this product.
***WARNING: To reduce the risk of electric
shock, this equipment has a grounding type
plug, that has a third (grounding) pin. This plug
will only fit into a grounding type outlet. If the
plug does not fit into the outlet, contact a qual-
ified electrician to install the proper outlet. Do
not change the plug in any way.
SAVE THESE INSTRUCTIONS
800.568.3949
1285 East 650 South
Price, Utah 84501
dustlesstechnologies.com
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tion. Many cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
CAUTION: Any changes or modification not express approved by Dustless Technologies, Inc. could void the user authorization to operate this equipment.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.