Programming the faceplate timer, Step 1. set time of day – EcoPure MW_MW30_450224 User Manual
Page 17
17
Miracle Water Installation & Operation Manual
Programming the Faceplate Timer
Figure 12
If you have questions about installation, programming, operating and routine maintenance...
call 1-800-356-7851
When the transformer is plugged into the electrical outlet, a model code and a test number (example:
s3.0), begins to flash in the faceplate display. Then, 12:00 AM and PRESENT TIME begins to flash.
NOTE:
If SR --or ----shows in the display, press the
UP
or DOWN . button until LE31 shows.
Then, press the SELECT/MENU button to set, and change to the flashing PRE-
SENT TIME display.
Step 1. Set Time of Day
If the words PRESENT TIME do not show in the display, press the (Select/Menu) button
until they do.
1. Press the UP
or DOWN . buttons to set the present time. Up moves the display ahead; down
moves the time backward.
Be sure AM or PM, is correct.
NOTE:
Press buttons and quickly release to slowly advance the display. Hold for fast advance. This
procedure applies for all following settings.
SELECT
MENU
SELECT
MENU