Removing egr cooler, Fig. 8, Fig. 9 fig. 10 – FLO~PRO 301008 User Manual
Page 7
Advertising
Removing EGR Cooler
STEP 13:
Remove the V-Band clamp that is connecting
the EGR cooler and the exhaust crossover
elbow. (Fig. 8)
STEP 14:
Remove the exhaust crossover elbow that is
held in place by two 15mm nuts. Install the
smaller of the two exhaust block off plates.
Location noted in Fig. 9.
STEP 15:
Remove the EGR cooler by pulling up and out
towards the front of the vehicle.
STEP 16:
Remove the EGR cooler mounting bracket by
unbolting the two 14mm bolts that bolt
directly to the engine. Fig. 10
Fig. 8
EGR Cooler
Exhaust
Crossover
Elbow
Fig. 9
Fig. 10
Advertising