Freedom Designs TriPod LT - Manual (Page 25)

23
Main Frame—Footboards & Individual
Flip Up Footplates
Flipping the Footplate Up for Transfer
The footboard flips backward, moving it out of the way
for ease of transfer.
1. Grasp the footboard at the front and lift rearward.
The footboard will stay in the flip back position
until you rotate it back to the original position.
Individual Flip Up Footplates
Adjustment of the individual flip-up footplates are as
follows:
1. The individual footplates easily flip by lifting
underneath the footplate to flip up or push down
on the footplate to flip down.
2. To adjust the height of the footplate :
Remove the hex head screws on the side of the
hanger. Seat the footplate at the desired height.
Insert the screws through the corresponding
holes in the hanger tube and tighten.
3. To adjust the angle of the flip-up footplate, loosen
the lock nuts under the footplate. Set the foot
plate at the desired angle and retighten nuts.
Steps 1 & 2
Step 3